Aeotec Крепление для мультисенсора 6
Install MultiSensor 6 on a ceiling or wall cavity with recessor
- Designed for Aeon Multisensor 6
- Easy Wall or Ceiling installation
- Extrudes only 1.2 cm space
Recessor for Multi Sensor 6
MultiSensor 6 is smartest and most subtle Z-Wave sensor available. Within its impossibly small design it features 6 different Z-Wave sensors, effortlessly monitoring a room and making your connected home all the more intelligent.
With Recessor, the impossibly small MultiSensor 6 becomes even more smaller. In fact, it becomes nearly invisible, sitting only 0.04 inches within a room.
1.2cm of sensor.
We like things small. We prefer them invisible. Recessor offers the best of both. It lets MultiSensor 6 monitor 6 different points of intelligence in a room, and it lets it do it without reducing its accuracy or functionality.
Itself only 4.4cm deep, Recessor snaps in place courtesy of 2 ingenious retainingspring clips. Those same springs of course allow for Recessor and MultiSensor 6 to be removed at any time without damaging your ceiling or wall.
Whether it’s within a wall or in a ceiling cavity, Recessor lets MultiSensor 6 work its magic subtly.
Monitor a full room with MultiSensor 6 using Recessor to install it within your ceiling.
Use MultiSensor 6 as a beam sensor by installing it within a wall cavity using Recessor.
Still perfectly powered.
The perfect option of running your MultiSensor 6 with mains or battery power continues with Recessor.
Recessor has been designed to allow for a power cable to still be connected to MultiSensor 6 so that it can run without batteries. Recessor has also been designed so that it can be easily removed to allow for MultiSensor 6’s batteries to be changed every 2 years.
Recessor doesn’t just convert MultiSensor 6 into a Z-Wave ceiling or beam sensor, it converts it into a precise sensor.
Once recessed, your MultiSensor 6 can be angled up to 30ºwithin Recessor, fine tuning its measurements and readings to be just where you need them.
After 3 easy steps, you’ll have Recessor installed within your wall or ceiling space.
|Make a 75mm/3″space for Recessor.||Lock MultiSensor 6 in place.|
|Insert Recessor-it’ll hold itself in place.||That’s it!|
More about MultiSensor 6.
MultiSensor 6 is more than just an invisible sensor, it’s a really clever. From its 6 different sensors to its precession engineering, it’s the sensor that means that the smart home is finally smart.
You can find out more about MultiSensor 6 here.
- Packing size:110x110x50 mm (LxWxH)
- Base size: 100x100x44 mm (LxWxH)
- IP CODE
- Sensor Unit.
- Battery Cover.
- Back Mounting Plate.
- Double-Sided Tape.
- Screws (x3).
- mICRO USB cable
- User manual
|Назначение||Управление освещением, ОбDetect Activityнаружение активности, Отслеживание погоды|