Z-Wave Plus TKB Home Одинарный сенсорный выключатель TA1011

Out of stock
SKU
TKB_TA1011

1-Gang Touch Screen Wall Switch to control lights and Z-Wave devices.

  • Sleek design to fit in with the contemporary home
  • Able to switch one electrical load with max.1380 watts
  • LED indicator to easily locate it in a dark room
  • On/Off function
  • Anti-flammable touch screen panel

The TKB 1-Gang Touch Screen Wall Switch - Gen5 wall switch can switch attached loads and is controlled either by the local switching paddle or remotely via the Z-Wave Plus wireless protocol. It can be included and controlled in a Z-Wave network by a remote control or Z-Wave controller including PC-software.

Beside the local load the unit can control other Z-Wave units remotely in up to three additional Z-Wave groups, which are associated with this device. The association of further Z-Wave devices is done by a Z-Wave controller. The unit is powered by 230 V power and needs a pattress box or back box with 230 V power wires for installation.

Note: The switch has been designed to hold up to a maximum load of 6 Amps (1380 watts) and works with a 3-Wire system. Please check your installation before purchasing. Further information about 2-wire and 3-wire installations is available in Wiki - Understanding 2-wire and 3-wire Lighting Systems.

technical-specifications

Technical Specification

  • HARDWARE
    • Z-Wave Chip 500 series
  • COMMUNICATION PROTOCOLS
    • Z-Wave Plus
  • MAXIMUM LOAD
    • AC 100V-120V: L1<600W
    • AC 220V-240V: L1<1380W
  • Z-WAVE GROUPS
    • Two groups and five devices each (nodes)
  • DIMENSIONS
    • Packing size:100x100x50 mm (LxWxH)
    • Base size:
      • Dimension front: 85x85 mm (LxW)
      • Dimension back: 60x65 mm (LxW)
  • CERTIFICATIONS
    • CE, Z-Wave
  • POWER SUPPLY INPUT
    • Input: AC 110V-250VAC, 50-60Hz
  • POWER CONSUMPTION
    • up to 0.5W
  • RADIO SIGNAL POWER
    • up to 1mW
  • RANGE
    •  up to 50m (outdoors) and 40m (indoors)
  • OPERATIONAL TEMPERATURE
    • 0-45°C
  • OPERATIONAL HUMIDITY
    • 8% - 80%
  • IP CODE
    • IP20
  • FOR INSTALLATION IN BOXES
    • D ≥ 90mm, depth ≥ 30mm

Package content

  • Unit
  • User manual

Z-Wave Specification

User manual

Guides

  • Guides
More Information
Технология Z-Wave
Z-Wave Plus: No
Z-Wave аппаратная платформа ZM5101
Z-Wave тип библиотеки Enhanced 232 Slave
Z-Wave тип устройства On/Off Power Switch
Z-Wave тип роли Always On Slave
Производитель TKB Home
Внутренняя/наружная установка Внутренняя
Максимальная нагрузка 6A
Группы ассоциаций 2
Тип диммера и выключателя настенный выключатель
Источник питания Кабель AC
Тип проводной системы 3-проводная
Функции настенного выключателя Двойной клик
Способы нажатия Одно нажатие
Назначение Управление освещением
OTA обновление прошивки No
Форм-фактор Настенный
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2015-2020 Swinestudio. All rights reserved.