Z-Wave Plus Aeotec Мультисенсор 6

In stock
SKU
AEO_ZW100
Rating:
95% of 100
As low as RUB5,390.00
  • Motion, Temperature, Humidity, Light, UV and Vibration Sensors
  • Z-Wave Connectivity
  • Superior Range
  • Longer Battery Life
  • Tamper Protection
  • Easy Installation
  • Z-Wave Plus Certified

Aeotec MultiSensor 6 - это умный способ поймать все действия, происходящие в вашем доме в режиме реального времени. Красиво разработанное устройство контролирует движения, отслеживает окружающее освещение, сохраняет значения комнатной температуры и влажности, слушает сейсмическую активность, а также защищает ваш дом от ультрафиолетового излучения.

Интеллектуальный датчик был разработан, чтобы обеспечить комплексное решение для поддержания связи с вашим домом, даже в то время, когда вы находитесь на работе или на отдыхе. MultiSensor 6 может быть настроен для работы с контроллером Z-Wave, чтобы получать обновления в реальном времени и уведомления о действиях в вашем доме. Хотите получать оповещения, когда кто-то входит в ваш дом, или вы хотите получать уведомления, когда есть неожиданные изменения в температуре? MultiSensor 6 делает отслеживание активность в доме в режиме реального времени возможным.

Пятое поколение мультисенсора имеет некоторые массивные улучшения - время ретрансляции сигналов происходит быстрее и дальше. Датчик также был откалиброван для точного мониторинга окружающей среды и поставляется со специализированными датчиками, получеными от ведущих компаний в Швейцарии и США.

Aeotec также сократила количество батареек ААА, необходимых для подачи питания на устройство до двух, но в настоящее время устройство имеет на 50% больше срок службы батареи, а средняя продолжительность жизни в настоящее время продлена до двух лет.

При весе всего в 75 грамм, MultiSensor 6 также является одним из самых легких датчиков на рынке, который может быть установлен даже на двухстороннюю ленту. Это также на 70% меньше, чем в предыдущей версии, то есть он может вписаться в любую домашнюю обстановку без ощущения его присутствия.

Make your home really intelligent.

One tiny device packed full of intelligence.

A smart home is only truly smart when it’s intelligent. A smart home has to offer more than a schedule; it has to react to what’s occurring in a home in real-time. MultiSensor 6 is the foundation of a modern smart home; within its perfectly small exterior lies all the technology for real-time intelligence.

6 sensors.
6 times the smarts.

motion

Motion sensor.

1Motion for security. Motion for presence. Motion for management. MultiSensor 6’s motion sensor is perfect for more than just an intelligent security system. With a 5 metre range and a 120° field of view, MultiSensor 6 captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data – MultiSensor 6 makes your home automation system more powerful and more intelligent.

2

temperature

Temperature sensor.

From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. MultiSensor 6 provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -10~50°C (14 to 122°F) and reporting temperature changes back to a smart home gateway.

3 lightlight

Light sensor.

Automated lighting is only as smart as the system that powers it. With MultiSensor 6’s real-time, digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambiance. From opening and closing curtains, to setting lights to be the perfect level be it day or night, MultiSensor 6 is the smarts behind smart lighting.

4humidity

Humidity sensor.

Spaces such as bathrooms and kitchens can be too humid, while some environments are often not humid enough. MultiSensor 6 offers incremental monitoring of a humidity ranging from 0% to 100%, allowing for the intelligent automation of fans, motorised windows, dehumidifiers and humidifiers. MultiSensor 6 monitors your home on such an infinitesimal level so that your home management system can make your environment truly perfect.

5vibration

Vibration sensor.

It measures the environement it’s in, and it also measures itself. MultiSensor 6 contains a seismic sensor capable of detecting and reporting event-based vibrations. Those slight changes can be used to protect MultiSensor 6 – it’ll know if an intruder is tampering with it or if the sensor has accidentally moved from its place of installation. They’ll also be able to record subtle seismic activity within your home.

6UV sensor

UV sensor.

Perfectly managing an environment means understanding it perfectly. MultiSensor 6 accurately measures ultraviolet light; the kind of light that causes everything from furniture bleaching to eye damage. Measured inline with the World Health Organisation’s UV Index, MultiSensor 6 measures a room’s UV level so that an environment can be managed through curtains, shades and lighting, and so that health and property recommendations can be made.

Not all MultiSensors are created equal.

There are MultiSensors and then there are MultiSensors. MultiSensor 6 isn’t just a redesign of Aeotec’s most intelligent sensor, it’s a complete reengineering from the inside out. We didn’t just tweak our first Multisensor, we redefined it.

Tamper protection
Tamper protection.

Now securer, MultiSensor 6 offers tamper protection, constantly monitoring itself to warn of movements or attempts to prevent it securing your home.

Secure communication
Secure communication.

As it secures and monitors your home, MultiSensor 6 is now itself secure. Communication between the sensor and your Z-Wave network is now encrypted using the AES-128 bit data encryption.

Superior wireless
Superior wireless.

Further and faster, MultiSensor 6’s wireless signals now reach 50% further, up to 150 metres, and 250% faster.

Calibration
Calibration.

For superior accuracy, MultiSensor 6 can be calibrated for every room and every environment with manual calibrations wirelessly available for its temperature, humidity, light and UV measurements.

4 times the life
4 times the life.

Forget changing your batteries a few times a year. MultiSensor 6 now works up to 2 years before you need to change batteries offering 4 times the battery life of the first MultiSensor.

Superior quality
Superior quality.

We’ve searched the world for the best sensors to power its 6 sensors. MultiSensor 6’s specialist sensors are now sourced from leading companies in Switzerland and the USA.

Half the batteries
Half the batteries.

Four different AAA batteries have powered past MultiSensors. Despite doubling the battery life of MultiSensor 6, we’ve reduced the number of batteries that power it down to just 2.

Lighter and easier
Lighter and easier.

Easier to install in all sorts of ways, MultiSensor 6 weighs 50% less than the first MultiSensor making it installable even with double sided tape.

Hello Fahrenheit
Hello Fahrenheit.

Wherever you are in the world, MultiSensor 6 speaks your language. Imperial Fahrenheit joins Celsius in the new sensor.

Digital light
Digital light.

Measuring light between 0 lux to 30000 lux, gone is the analogue light sensor with it replaced in MultiSensor 6’s with real-time, digital measurements.

70% smaller
70% smaller.

Sometimes smaller is better. Completely redesigned and reengineered, MultiSensor 6 is 70% smaller and 100% more elegant.

6 in 1
6 in 1.

Amazing things come in smaller packages. MultiSensor 6 offers 6 different sensors, with UV and vibration sensors joining light, humidity, motion and temperature sensors.

Simple to install in so many ways.

Because it’s capable of capturing so much useful data and offering so much intelligence to your smart home, there are a lot of places you might want to install MultiSensor 6 within your home. Yes, the traditional ceiling-corner location is one of them. But because it’s now 70% smaller than previous MultiSensors and weighs only 74 grams, MultiSensor 6 can now be installed almost anywhere.

wall

wall
Wall.

Used as a beam sensor, MultiSensor 6 will monitor confined spaces and corridors up to 5 metres wide.

celling

Automation
Invisible.

How small can MultiSensor 6 be? Install it in a ceiling using the recess mount accessory (sold separately) and MultiSensor 6 will take up only 1.2cm of space.

book

book
Shelf.

Perfectly graded at just 3.5°, MultiSensor 6’s tapered sides make the perfect installation as simple as placing it on a shelf.

corner

corner
Corner.

The traditional motion sensor gets an intelligent upgrade. MultiSensor 6 can be installed up to 5 metres off the ground with a 120° motion.

mult top

Not just small.
Perfectly small.

Creating an object designed to secure and manage your home takes precision. It also takes subtlety. MultiSensor 6 is perfectly small. Its beautifully tapered, 42 mm body allows it to be used anywhere within the home, but its design and styling hasn’t been crafted simply to be attractive. A squared based allows MultiSensor 6 to offer a battery life of over 2 years, the best of any Z-Wave motion sensor. Rounded edges distance MultiSensor 6 from the ocular, security camera styling of the round MultiSensor we pioneered and that feels invasive in this age of privacy.

MultiSensor 6 has been designed to be more than beautiful; it’s been designed so that its presence in a room is never obvious. Subtle is smart.

mult front

70%
SMALLER

multside

42 mm
WIDE AT THE BASE

mult back

50%
LIGHTER

Smart sensor. Smart accessories.

The perfect sensor comes with the perfect accessories. MultiSensor 6 ships with 4 different accessories, each designed to make the installation of the sensor perfect for your home.

mult accessories

Recessor.
Install MultiSensor 6 in a ceiling or wall cavity with recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.

mult accessories

Mounting arm.
Discrete and for corner installations, the mounting arm allows you to rotate MultiSensor 6 up to 360° and refine its field of view by up to 50°.

mult accessories

USB cable.
After 2 years you won’t have to change batteries if you power MultiSensor 6 via mains power using the provided 1.5 metre USB cable.

mult accessories

Tape.
Weighing only 74 grams, MultiSensor 6 can be easily installed with just the provided double sided tape from 3M.


Perfect batteries.

mult blone

mult bltwo

Your home’s intelligence will depend on it, and so might its security, so MultiSensor 6 needs to be powered by the best battery configuration possible.

MultiSensor 6 has been engineered to use two CR123A batteries. Their Li-MnO2 chemistry offers up to 2 years’ battery life and 3,000 mAh of power capacity in a super compact size that’s only 17mm / 0.6” in diameter.

Perfect power.

Perfect battery life isn’t perfect for every installation. For all those times, MultiSensor 6 can be run on mains power. Simply connect it to your home’s electricity using the provided USB cable and MultiSensor 6 will be able to run in an advanced mode, providing temperature, humidity and light readings in real-time.

mult usb

Perfect antenna.

antenna desk

There’s small, and there’s perfectly small. MultiSensor 6 is the latter.

It’s possible to engineer devices to be too small, limiting their functionality and creating performance and safety issues. MultiSensor 6 avoids all that, offering the perfect balance between form and function.Within its 42mm body sit 5 different PCBs, 6 different sensors and the capacity for over 2 years’ of battery performance. Better still, MultiSensor 6 includes a perfectly engineered antenna that can accurately perform up to 150 metres / 492 feet point-to-point.

Precision engineering.

Sensor technology gets more impressive every day. Your smartphone benefits from it, and now your home can too.

MultiSensor 6 has been precision engineered based on a very simple premise: for a smart home to truly be smart it has to be intelligent. Really intelligent. Around that idea we’ve built a sensor that offers your home 6 key points of intelligence that Z-Wave smart home systems can use to make truly smart decisions.

And then we made MultiSensor 6 even better.

back
  • 2 x CR123A batteries
  • Light / UV sensor
  • PIR
  • Z-Wave 5101
  • RGB LED
  • Temperature / Humidity Sensor
  • Vibration Sensor
  • PE Lens
outdoor sensor

Outdoor sensor.
Use outdoor intelligence. IP20 rated, you can use MultiSensor 6 outdoors by disabling its motion sensor and usings its 5 other sensors.

accurate sensor

Accurate sensor.
Designed and calibrated to be as accurate as possible, MultiSensor 6’s six sensors are fine tuned to have accuracy variations that are as little as only ±0.2%.

wireless

Updated sensor.
An intelligent sensor that will keep getting more intelligent, you can update MultiSensor 6’s settings and firmware using wirelessly.

battery detection

Battery detection.
When run on batteries, MultiSensor 6 will send low battery warnings to your Z-Wave gateway before it’s time to change them.

sensitivity

Sensitivity.
MultiSensor 6 is sensitive to change. But it might be too sensitive for your needs. You can decrease or increase the sensor’s sensitivity from your Z-Wave gateway.

calibration

Calibration.
Every MultiSensor 6 is calibrated by our engineers for precision. And you can calibrate it too, adjusting the values of its sensors to be precise for your home, indoors and out.

power modes

Power modes.
It’s 2 year battery life is fantastic. But power it by cable and MultiSensor 6 can make even more accurate and more frequent sensor measurements.

tamper

Tamper detection..
Its security features are themselves secured. MultiSensor 6’s AES 128 bit wireless encryption is complemented by anti-tamper and drop sensors.

150m

Perfect wireless.
An intelligence and security sensor needs to offer reliable wireless. MultiSensor 6 does. Its fine tuned antenna means that it can communicate with other Z-Wave devices up to 150 metres / 492 feet away.

The best MultiSensor.
The best Z-Wave.

Радиус действия

Чем больше диапазон действия, тем более надежным является продукт - устройство имеет первоклассную антенну. Оптимизированное для надежности, это устройство может взаимодействовать беспроводным способом на расстояния более 150 метров.

Поколение 5

Лучше антенна. Лучше Z-Wave. Устройство разработано на технологии Z-Wave Plus последнего 5го поколения, чтобы предоставить вам самое быстрое время отклика и оптимальное время жизни батареи между перезарядками.

Безопасность

Если вы используете устройство для обеспечения безопасности, вы хотите чтобы взаимодействие было защищенным. Вот почему устройство использует беспроводное шифрование AES-128 для защиты от несанкционированного доступа и хакеров.

Беспроводное обновление

Используете ли вы устройство для комфорта или безопасности, вы желаете чтобы оно всегда оставалось обновленным до последней версии. Как бы не создавались обновления прошивки для устройства, вы всегда можете обновить его с помощью Microsoft Windows или выбрать Z-Wave контроллер.

technical-specifications

Technical Specification

  • MODEL NUMBER
    • ZW100
  • HARDWARE
    • Z-Wave Chip 500 series
  • COMMUNICATION PROTOCOLS
    • Z-Wave Plus
  • Z-WAVE GROUPS
    • One group and five devices (nodes)
  • SENSORS
    • PIR
    • Temperature
    • Light
    • Humidity
    • Vibration
    • UV
  • DIMENSIONS
    • Packing size:100x600x40 mm (LxWxH)
    • Base size: 72x72x42 mm (LxWxH)
  • CERTIFICATIONS
    • CE, Z-Wave
  • POWER SUPPLY
    • USB DC 5V or battery power(2xCR123A batteries, 3V, 1500mAh).
  • POWER CONSUMPTION
    • up to 1W
  • RADIO SIGNAL POWER
    • up to 1mW
  • RANGE
    •  up to 150m (outdoors) and 100m (indoors)
  • OPERATIONAL TEMPERATURE RANGE
    • 0-40°C  
  • MEASURED TEMPERATURE
    • -10-50°C Accuracy: ±0.5°C
  • RELATIVE HUMIDITY: 
    • 8% - 80%. Accuracy: ±5%RH (at 25°C )
  • LIGHTING
    • 0 LUX to 30000 LUX
  • MAX MOTION SENSIVITY
    • 5 metres
  • IP CODE
    • IP20

Package content

  • Unit:
    • Sensor Unit. 
    • Battery Cover.
    • Back Mounting Plate. 
    • Double-Sided Tape.
    • Screws (x3). 
    • mICRO USB cable
  • User manual

Additional Info

Z-Wave Association Capabilities


Group ID

Maximum Nodes

Description

1 5 The MultiSensor supports 1 association group. Group 1 is assigned to the Lifeline association group and can add max 5 association nodes. When the PIR motion sensor is triggered, the MultiSensor will send Basic Set (0xFF) to the associated nodes. If no PIR motion is triggered after the PIR interval time (configurable), the MultiSensor will send Basic Set (0x00) to the associated nodes. The automatically reports of temperature, humidity, luminance and ultraviolet (configurable) also can be sent to the associated nodes.

Z-Wave Configuration Capabilities


Parameter Number

Parameter Size

Parameter Name

Parameter Values

100 1 Set the parameter 101-103 to default values. 1 Set the parameter 101-103 to default values.
101 4 To set which report would be sent in Report group 1 128 Luminance Report is enabled.
  1 Battery Report is enabled.
  32 Temperature Report is enabled.
  64 Humidity Report is enabled.
  16 Ultraviolet Report is enabled.
102 4 To set which report would be sent in Report group 2 16 Ultraviolet Report is enabled.
  1 Battery Report is enabled.
  32 Temperature Report is enabled.
  128 Luminance Report is enabled.
  64 Humidity Report is enabled.
103 4 To set which report would be sent in Report group 3 1 Battery Report is enabled.
  128 Luminance Report is enabled.
  16 Ultraviolet Report is enabled.
  64 Humidity Report is enabled.
  32 Temperature Report is enabled.
111 4 To set the interval time of sending reports in Report group 1 5 to 2678400
(Default)
Available rang is 5 to 2678400 seconds.
112 4 To set the interval time of sending reports in Report group 2 5 to 2678400
(Default)
Available rang is 5 to 2678400 seconds.
113 4 To set the interval time of sending reports in Report group 3 5 to 2678400
(Default)
Available rang is 5 to 2678400 seconds.
2 1 Enable/Disable waking up for 10 minutes when re-power on (battery mode) the MultiSensor. 0
(Default)
Disable
  1 Enable.
201 2 Temperature sensor calibration -128 to 127
(Default)
Available rang is -12.8℃ to 12.7℃.
202 1 Humidity sensor calibration -50 to 50
(Default)
Available rang is -50RH to 50RH.
203 2 Luminance sensor calibration -1000 to 1000
(Default)
Available rang is -1000Lux to 1000Lux.
204 1 Ultraviolet sensor calibration -10 to 10
(Default)
Available rang is -10 to 10.
252 1 Enable/disable all configuration parameters to be locked 0
(Default)
Disable
  1 Enable.
255 4 Reset to factory defaults. 1 Reset all configuration parameters to factory defaults.
  1431655765 Reset the product to factory defaults.
3 2 Set the PIR time. 10 to 3600
(Default)
The range of PIR time is 10 to 3600.
39 1 Configure the default low battery value. 10 to 50
(Default)
Available rang is 10% to 50%.
4 1 Set the sensitivity of the motion sensor. 1 Sensitivity Level 1 of 6
  5
(Default)
Maximum Sensitivity
  0 Minimum Sensitivity
  4 Sensitivity Level 5 of 6
  2 Sensitivity Level 2 of 6
  3 Sensitivity Level 3 of 6
40 1 Enable/disable the selective reporting only when measurements reach a certain threshold or percentage 0
(Default)
Disable
  1 Enable.
41 4 Threshold change in temperature to induce an automatic report. 10 to 2120
(Default)
Available rang of threshold is 1℉ to 212℉.
42 1 Threshold change in humidity to induce an automatic report 1 to 100
(Default)
Available rang is 1% to 100%.
43 2 Threshold change in luminance to induce an automatic report. 1 to 30000
(Default)
Available rang is 1 LUX to 30000 LUX.
44 1 Threshold change in battery level to induce an automatic report. 1 to 100
(Default)
Available rang is 1% to 100%.
45 1 Threshold change in ultraviolet to induce an automatic report. 1 to 11
(Default)
Available rang is 1 to 11.
46 1 Enable/disable to send the alarm report of low temperature 1 Enable.
  0
(Default)
Disable
  1 to 30000 Available rang is 1LUX to 30000LUX.
48 1 Enable/disable to send a report when the measurement is more than the upper limit value or less than the lower limit value. 0
(Default)
Disable
  1 Enable.
49 4 Set the upper limit value of temperature sensor. -400 to 2120
(Default)
Available rang is -40.0℉ to 212.0℉.
5 1 Which command would be sent when the motion sensor triggered. 2 Send Sensor Binary Report CC
  1
(Default)
Send Basic Set CC
50 4 Set the lower limit value of temperature sensor. -400 to 2120
(Default)
Available rang is -40.0℉ to 212.0℉.
51 1 Set the upper limit value of humidity sensor. 0 to 100
(Default)
Available rang is 0% to 100%.
52 1 Set the lower limit value of humidity sensor. 0 to 100
(Default)
Available rang is 0% to 100%.
53 1 Set the upper limit value of Lighting sensor 0 to 30000
(Default)
Available rang is 0 to 30000LUX.
54 1 Set the lower limit value of Lighting sensor. 0 to 30000
(Default)
Available rang is 0 to 30000LUX.
55 1 Set the upper limit value of ultraviolet sensor. 1 to 11
(Default)
Available rang is 1 to 11.
56 1 Set the lower limit value of ultraviolet sensor. 1 to 11
(Default)
Available rang is 1 to 11.
57 2 Set the recover limit value of temperature sensor. 10 to 255
(Default)
Available rang is 1.0℉ to 25.5℉
58 1 Set the recover limit value of humidity sensor. 1 to 50
(Default)
Available rang is 1 to 50%
59 1 Set the recover limit value of Lighting sensor. 1 to 127
(Default)
Available rang is 10Lux to 1270Lux
60 1 Set the recover limit value of Ultraviolet sensor. 256 Keep sleep state for Battery power mode
  257 Keep awake for 10 minutes for battery power mode.
  0 USB power mode
  1 to 5
(Default)
Available rang is 1 to 5.
61 2 Get the out-of-limit state of the Sensors. 8 Ultraviolet sensor is out of the lower limit
  32 Humidity sensor is out of the upper limit
  16 Temperature sensor is out of the upper limit
  2 Humidity sensor is out of the lower limit
  4 Luminance sensor is out of the lower limit
  64 Luminance sensor is out of the upper limit
  128 Ultraviolet sensor is out of the upper limit
  1 Temperature sensor is out of the lower limit
64 1 Set the default unit of the automatic temperature report in parameter 101-103. 2
(Default)
The unit is Fahrenheit.
  1 The unit is Celsius.
8 1 Set the timeout of awake after the Wake Up CC is sent out.. 8 to 127
(Default)
Available rang is 8 to 127 seconds.
81 1 Enable/disable the LED blinking when the PIR is triggered. 1 Disable
  0
(Default)
Enable.
9 2 Report the current power mode and the product state for battery power mode 257 Keep awake for 10 minutes for battery power mode.
  256 Keep sleep state for Battery power mode
  0
(Default)
USB power mode

User manual

Guides

  • Guides
More Information
EAN 1220000013100
Технология Z-Wave+
Z-Wave Plus: No
Z-Wave аппаратная платформа ZM5101
Z-Wave тип библиотеки Enhanced 232 Slave
Z-Wave тип устройства Multilevel Sensor
Z-Wave тип роли Reporting Sleeping Slave
Группы ассоциаций 1
Производитель Aeotec
Тип датчика мультисенсор, движения, температуры, влажности, освещенности, вибрации, УФ-излучения
Функции датчиков Питание от DC блока
Внутренняя/наружная установка Внутренняя, Наружная
Источник питания USB, Батарея
Тип батареи CR 123
Форм-фактор Настенный
Назначение Управление освещением, ОбDetect Activityнаружение активности, Отслеживание погоды
OTA обновление прошивки Yes
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2015-2020 Swinestudio. All rights reserved.