Z-Wave Plus Everspring Inwall On/Off Module
In-wall module for remotely controlling appliances in your home
- Z-Wave Plus connectivity
- Installs behind a wall switch
- Control lighting, motors or actuators wirelessly
- Overheating protection
- Easy Installation
- Z-Wave Plus Certified
Everspring In-wall On/Off Module is a Z-Wave module that allows you to toggle electrical appliances wirelessly. The device installs behind a wall switch and allows you to remotely control the appliances connected with the power outlet through a Z-Wave home automation gateway or remote control.
Control Lighting
The smart In-wall module has been designed to work perfectly with incandescent, fluorescent or LED lighting. Since it installs inside the wall, it's a convenient way to add smart wireless control to any lighting source in your home. At 230V voltage, this module can support up to 11A resistive, 1200W incandescent, 700W motor, or 320W (40W*8) fluorescent load.
Overload Protection
For security, the unit can detect overheating and will automatically turn off the relay to avoid damage. It's also smart enough to automatically remember the status of the relay when it's powered again.
Easy Installation
The In-Wall On/Off Module supports 2 sets of dry contacts that can be wired conveniently inside the wall to wirelessly control the connected device. The module does not disrupt the normal functioning of the device, and still allows you to control the connected electrical devices normally from the wall switches .
Note: This module requires the Neutral to operate.
Technical Specification
- HARDWARE
- Z-Wave Chip 500 series
- COMMUNICATION PROTOCOLS
- Z-Wave Plus
- FEATURES
- Relay input separated from AC; can be use for DC, motor loads, alarms, etc
- Remembers last status before power cut
- Hardware overload protection
- Dry contact interface to 2-gang wall switch; rocker and momentary types
- LED AND BUTTONS
- LED indicator
- Include/Exclude button
- ASSOCIATION GROUP
- One groupa nand 5 devices (nodes)
- MAXIMUM LOAD
- 11A (Resistive)
- 1200W (Incandescent)
- 320W (Fluorescent )
- OVERCURRENT PROTECTION
- required external 10A circuit breaker
- DIMENSIONS
- 42.5 x 38.25 x 20.3mm (LxWxH)
- CERTIFICATIONS
- FCC, DEKRA, Z-Wave
- POWER SUPPLY
- Input: AC 100-240VAC, 50-60Hz
- POWER CONSUMPTION
- up to 0.8W
- RADIO SIGNAL POWER
- up to 1mW
- RANGE
- up to 50m (outdoors) and 40m (indoors)
- OPERATIONAL TEMPERATURE
- -10-40°C
- FOR INSTALLATION IN BOXES
- D ≥ 50mm, depth ≥ 60mm
Package content
- Unit
- User manual
Z-Wave Specification
Z-Wave Association Capabilities
Model: In-Wall On/Off Switch Module (AN179-0)
Z-Wave Certification Number: ZC10-14080013
Group ID |
Maximum Nodes |
Description |
1 | 5 | Z-Wave Plus Lifeline |
Z-Wave Command Classes
Model: In-Wall On/Off Switch Module (AN179-0)
Z-Wave Certification Number: ZC10-14080013
Supported Command Classes |
All Switch |
Association |
Association Group Information |
Basic |
Configuration |
Device Reset Local |
Firmware Update Meta Data |
Manufacturer Specific |
Notification |
Powerlevel |
Switch Binary |
Version |
ZWavePlus Info |
Controlled Command Classes |
Basic |
Z-Wave Plus: | No |
---|---|
Z-Wave аппаратная платформа | SD3502 |
Z-Wave тип библиотеки | Enhanced 232 Slave |
Z-Wave тип устройства | On/Off Power Switch |
Z-Wave тип роли | Always On Slave |
Технология | Z-Wave+ |
Внутренняя/наружная установка | Внутренняя |
Производитель | Everspring |
Группы ассоциаций | 1 |
Z-Wave Функции | Запуск сцен |
Максимальная нагрузка | 11A |
Тип диммера и выключателя | вставной модуль |
Источник питания | Кабель AC |
Тип проводной системы | 3-проводная |
Тип вставного модуля | Реле - 1 нагрузка |
Функции вставных модулей | Дополнительные входы, Выход сухой контакт |
Форм-фактор | Настенный |
Назначение | Управление освещением |
OTA обновление прошивки | Yes |